Sparrow + Aire Studio
Full House Lighting Plan
3806 Carmona Ave
Los Angeles, CA
Design Intent · Rev 03 · 14 Oct 2026
49
3" Recessed Fixtures
4
Ceiling Fans
5
Sconces + Mirrors
2
Pendant Assemblies
45
Control Device Positions
2700K
All Fixtures · Warm White
Full House Lighting + Furniture Plan — L-01
Symbol Legend
3" Recessed Light Circle + cross mark
Wet-Location Shower Light W · Blue circle + cross
F
Ceiling Fan Independent speed control
P
Island / Banquette Pendant P · Decorative assembly
Wall Sconce Gold dot
Cove / Task / Niche LED Gold line · Linear strip
Integrated Closet LED Green line
Illuminated Vanity Mirror Blue line
Confirmed Design
  • Living: continuous full-perimeter cove
  • Primary suite: fan + 2 reading sconces
  • All other bedrooms: fan + recessed
  • Primary bath: 2 illuminated mirrors + 3 sconces
  • Kids + guest bath: illuminated mirrors
  • Kitchen: island + banquette pendants
  • Laundry: under-cabinet + backsplash LED
  • No cylinder fixtures or hood sconces
Drawing Basis
  • Furniture added per client blue markup
  • Primary door + built-in revised per markup
  • Fixture placements are proposed
  • LED lengths require field measurement
  • Porch boundary not clearly shown; exterior fixtures omitted
  • Even fixture rows; dimensions to verify
  • 8 ft ceilings throughout
Sheet L-02
Fixture Quantities + Room Schedule
Proposed fixture counts per zone. Wet-location shower lights are included in the recessed total. LED strip lengths are control zones, not purchase quantities.
Room / Zone 3" Recessed Fans Decorative / Mirrors Linear LED
Primary Suite 4 1 2 reading sconces —
Bedroom 2 / Full 4 1 — Closet run
Bedroom 3 / Full 4 1 — Closet run
Guest / Office / Queen 4 1 — Built-in closet — location verify
Living Room 6 0 — 1 continuous perimeter cove
Kitchen / Banquette 6 0 1 island pendant assembly Under-cabinet runs
Hallways / Entry 7 0 — Primary built-in closet run
Primary Bath 3 0 3 sconces + 2 illuminated mirrors 1 shower niche zone
Kids Bath 2 0 1 illuminated mirror 1 shower niche zone
Kitchen Banquette 2 0 1 banquette pendant —
Powder Room 3 0 Mirror lighting not specified —
Laundry / Pantry 4 0 — Under-cabinet + backsplash
TOTAL 49 4 5 sconces / mirrors · 2 pendants Lengths TBD

Counts correspond to symbols on L-01. Three wet-location shower lights are included in the recessed total.

Primary mirrors retain illumination as confirmed; left / center / right sconces form a separate lighting layer.

Island and banquette pendants are two separate assemblies; lamp counts depend on selected fixtures.

LED strip lengths and drivers are not purchase quantities until cabinetry, niche and cove details are measured.

Fan blade sweep and recessed offsets must be coordinated to prevent light flicker from moving blades.

Sheet L-03
Lighting Controls + Coordination
Each zone's control layers and dimming intent. Dimmers control lighting only; fans require manufacturer-compatible speed controls.
Primary Suite
Separate recessed dimmer · Left reading sconce control · Right reading sconce control · Independent fan speed control
Other Three Bedrooms
One recessed dimmer per room · One independent fan speed control per room · Closet LEDs on separate compatible controls
Living Room
Separate recessed and full-perimeter cove dimmers · Coordinate cove termination at openings without exposed LED dots
Kitchen / Banquette
Separate recessed, island pendant, banquette pendant and under-cabinet LED dimmers · Banquette pendant centered over its table
Hallways / Entry
Recessed lighting by circulation zone · Proposed multi-location control at both ends of long hall; verify switch-bearing walls
Primary Bathroom
Separate general recessed, shower recessed, mirror illumination, three vanity sconces and niche LED controls
Kids + Guest Bathrooms
In each bathroom: separate general recessed, shower recessed, illuminated mirror and niche LED controls
Powder Room
One recessed lighting control for the revised three-light powder zone · Decorative mirror lighting remains unspecified
Laundry / Pantry
Separate recessed, under-cabinet task LED and backsplash accent LED dimmers · Avoid duplicating the same physical strip
Closets / Built-Ins
Integrated LED lighting with accessible drivers · Separately controlled · Door sensors can be coordinated with the cabinet maker
Coordination Notes
  • Dimmers control lighting only; fans require manufacturer-compatible speed controls.
  • Confirm LED driver, mirror and fixture dimming compatibility before procurement.
  • Use shower-rated fixtures and suitable LED assemblies for wet locations; keep serviceable drivers accessible.
  • Final branch circuits, protection, required sensors and electrical code compliance to be coordinated by the project electrician.
  • No fixture wattages, circuit numbers or verified mounting dimensions are inferred from this drawing set.
Sheet L-04
Switch Devices + Wall Plates by Room
Proposed device and plate counts. Plate grouping requires verification against wall space, door swings and final box arrangement before ordering.
Room / Zone Single-Pole Dimmers 3-Way Devices Fan Controls Wall Plates / Gangs
Primary Suite 2 2 1 2 × 2-gang · 1 × 1-gang
Bedroom 2 2 0 1 1 × 2-gang · 1 × 1-gang
Bedroom 3 2 0 1 1 × 2-gang · 1 × 1-gang
Guest Bedroom / Office 2 0 1 1 × 2-gang · 1 × 1-gang
Living Room 0 4 0 2 × 2-gang
Kitchen + Banquette 3 2 0 1 × 3-gang · 1 × 2-gang
Hallways + Primary Closet 1 4 0 2 × 2-gang · 1 × 1-gang
Primary Bathroom 5 0 0 1 × 4-gang · 1 × 1-gang
Kids Bathroom 4 0 0 1 × 4-gang
Guest Bathroom (allowance)* 4 0 0 1 × 4-gang
Powder Room 1 0 0 1 × 1-gang
Laundry / Pantry 3 0 0 1 × 3-gang
TOTAL 29 12 4 22 plates · 45 device positions

3-way = two locations controlling one lighting group. Twelve devices form six 3-way groups.

For each 3-way group: allow one dimmer + one compatible companion (or 3-way switch), subject to selected system.

Four fan controls are speed controls, not lighting dimmers. Integrated fan lights, if selected, need additional controls.

Each secondary bedroom includes a separate closet LED control; its exact cabinet/switch location remains to be verified.

*Guest bathroom controls are an allowance. Confirm the actual guest bathroom location before placing these four controls.

Sheet L-05
Light Type Totals + Switch Procurement
Control device summary for procurement allowance. LED quantities are control zones, not strip lengths or driver counts.
Dimmer Order Allowance
  • 29 single-pole dimmers
  • 6 multi-location masters
  • 6 compatible 3-way companions
  • 4 fan-speed controls
  • 35 dimmers total
Wall Plate Order Allowance
  • 7 × 1-gang
  • 10 × 2-gang
  • 2 × 3-gang
  • 3 × 4-gang
  • 22 plates total
4-Way + Standard Switches
  • 4-way switches: 0 proposed
  • Standard non-dimming single-pole: 0 proposed
  • All dimmable system throughout
Light Type / Group Qty Single-Pole 3-Way Control Basis
3" Recessed Lights 49 11 10 Single-point in beds, baths, powder, laundry; multi-point elsewhere
Living Room Cove LED 1 zone 0 2 Two locations, separate from recessed
Primary Reading Sconces 2 2 0 One individual control at each bedside
Island + Banquette Pendants 2 2 0 One separate dimmer per pendant assembly
Closet Integrated LEDs 4 zones 4 0 Three bedroom closets + primary built-in
Kitchen + Laundry Under-Cabinet LEDs 2 zones 2 0 Separate dimmer in each room
Laundry Backsplash LED 1 zone 1 0 Separate accent lighting dimmer
Illuminated Vanity Mirrors 4 3 0 Primary mirror pair on one control; one each in kids / guest bath
Bathroom Niche LEDs 3 zones 3 0 One separate control per bathroom
Primary Vanity Sconces 3 1 0 Left / center / right sconces controlled together
Bedroom Ceiling Fans 4 fan — 0 4 independent fan-speed controls
TOTAL CONTROL DEVICES 45 positions 29 12 Plus 4 fan-speed controls

Dimmable mirrors require compatible products; confirm compatibility before procurement.

Recessed fixture total excludes any unlocated guest bathroom fixtures; its control allowance is included above.

This schedule covers lighting and bedroom fans only; receptacles, bath exhaust fans and appliance switches are excluded.

Preliminary / Design Intent — Not for Construction · Rev 03 · 14 Oct 2026 · Verify field dimensions, ceiling framing, fixture output and mounting before installation.